Shandong Kangbao Biochemical Technology Co., Ltd. 6,000 tons/year cane sugar deep processing project technical transformation project environmental protection facilities commissioning date:

Shandong Kangbao Biochemical Technology Co., Ltd. entrusted Jiangsu Suchen Survey and Design Research Institute Co., Ltd. to prepare the "Environmental Impact Report Form for the Technical Transformation Project of the 6,000-ton/year Cane Sugar Deep Processing Project of Shandong Kangbao Biochemical Technology Co., Ltd." in October 2019 On the 25th, it obtained the approval of Lijin County Branch of Dongying Ecological Environment Bureau (Donghuan Lifen Jianshen [2019] No. 030). According to the requirements of the EIA approval, after the technical transformation, 1 cyclohexane storage tank, 1 rectification reaction tower, 1 first-level stratification tank, 2 second-level stratification tanks, 1 light removal tower, neutralization reactor 3 units, 1 dimethylamine rectification tower.

After the technical transformation of the project, the production yield of the product can be increased by about 10%.

The environmental protection facilities of the technical transformation project of the 6,000 ton/year sucrose deep processing project of Shandong Kangbao Biochemical Technology Co., Ltd. were completed on April 1, 2020. The commissioning date of the environmental protection facilities of the 6,000 ton/year sucrose deep processing project of Shandong Kangbao Biochemical Technology Co., Ltd. is from April 1, 2020 to July 1, 2020. In accordance with the "Regulations on the Administration of Environmental Protection of Construction Projects" (Order of the State Council [2017] No. 682) and the "Interim Measures for the Acceptance of Environmental Protection on the Completion of Construction Projects" (State Environmental Planning EIA [2017] No. 4), the completion date of the environmental protection facilities of this project is now announced. Open to the public, our company will actively carry out the acceptance of environmental protection on the completion of construction projects in accordance with the law.

Construction site: Shandong Lijin Economic Development Zone, north of Liba Road, west of Jinba Road, Shandong Kangbao Biochemical Technology Co., Ltd

Contact: Liu Zhicheng

Phone: 13386478128

Construction project construction scale:

Shandong Kangbao Biochemical Technology Co., Ltd. is located in Shandong Kangbao Biochemical Technology Co., Ltd. to the north of Liba Road and west of Jinba Road, Lijin Economic Development Zone, Shandong Province. The coordinates of the center point are 118 ° 12 '11.04 "east longitude and 37 ° 31' 7.87" north latitude. The project is a technical transformation project of a 6,000-ton/year sucrose deep processing project. After the technical transformation of the project, 1 epoxy storage tank, 1 rectification reaction tower, 1 A stratified tank, 2 secondary stratified tanks, 1 light removal tower, 3 neutralization reactors, 1 dimethylamine distillation tower The actual total investment 52 million yuan, of which environmental protection investment 5.75 million yuan, accounting for 11.06% of the total investment.

Construction project pollution products discharge, environmental protection facilities construction and execution standards:

Wastewater: recovery unit 2 distillation tower 2 condensation wastewater, resin regeneration wastewater, recovery unit 4 distillation tower condensation wastewater, recovery unit 5 distillation tower wastewater, dimethylamine spray tower wastewater, dimethylamine device sewage, pure water station concentrated water relying on the company After treatment by the sewage treatment site, it is discharged into the sewage pipe network, and after treatment by Lijin County Huanhai Sewage Treatment Co., Ltd., it is discharged into the Taiping River. The discharge of the project wastewater implements the "Water Quality Standard for Sewage Discharge into Urban Sewers" (GB/T31962-2015) Table 1 Class B standard and the influent water quality requirements of Lijin County Huanhai Sewage Treatment Co., Ltd.

Exhaust gas:

1) Organized waste gas

The exhaust gas in the installation area: the chlorine reaction non-condensable gas, the neutralization reaction non-condensable gas, and the layered tank exhaust gas are combined into the exhaust gas treatment device in the installation area for treatment. The treatment process is "three-stage water washing + two-stage alkali washing + three-stage activated carbon adsorption". The concentrated non-condensable gas in the concentrated kettle is processed by the three-stage activated carbon adsorption device. After the treatment is completed, the exhaust gas is discharged from an exhaust pipe with a height of 25m and an inner diameter of 0.2m. SO2 implements the standard limit requirements of key control areas in Table 1 of the "Regional Comprehensive Emission Standard for Air Pollutants" (DB37/2376-2019). HCl implements the limit value requirements of the secondary standard in Table 2 of the "Comprehensive Emission Standard for Air Pollutants" (GB16297-1996). VOCs implement the concentration limit requirements in Table 1 of the "Volatile Organic Compound Emission Standard, Part 7: Other Industries" (DB37/2801.7-2019).

Crushing exhaust gas: The exhaust gas generated during the crushing process is treated by a bag filter and discharged through an exhaust pipe with a height of 20m and an inner diameter of 0.2m. The particulate matter in the exhaust gas implements the standard limit requirements of the key control area in Table 1 of the "Regional Comprehensive Emission Standard for Air Pollutants" (DB37/2376-2019).

Dimethylamine neutralization kettle: After the generated exhaust gas is treated by water spray + photocatalytic oxidation, the exhaust gas is discharged through an exhaust pipe with a height of 30m and an outlet inner diameter of 0.3m. Sulfuric acid mist implements the requirements of the secondary standard in Table 2 of the "Comprehensive Emission Standard for Air Pollutants" (GB16297-1996). VOCs implement the "Volatile Organic Compound Emission Standards, Part 7: Other Industries" (DB37/2801.7-2019) Table 1 Limit Requirements. Odor concentration implements the limit requirements when the exhaust cylinder in Table 2 of the "Odor Pollutant Emission Standards" (GB14554-93) is 30m (odor concentration 6000 (dimensionless)).

Incinerator exhaust gas: The exhaust gas treated by the incinerator is discharged from an exhaust pipe with a height of 25m and an inner diameter of 0.4m. SO2, NOx, and particulate matter implement the standard limit requirements of key control areas in Table 1 of the "Regional Comprehensive Emission Standard for Air Pollutants" (DB37/2376-2019), and methanol implements the "Comprehensive Emission Standard for Air Pollutants" (GB16297-1996). 2 level standard requirements, VOCs implement the standard limit requirements in Table 1 of "Volatile Organic Compounds Emission Standards, Part 7: Other Industries" (DB37/2801.7-2019). The blackness of flue gas complies with the limit requirements in Table 1 of the "Industrial Furnace Air Pollutant Emission Standard" (DB37/2375-2019) (flue gas blackness 1.0 Ringerman blackness (grade)).

2) Unorganized waste gas

Non-organized waste gas SO2, HCl, methanol, sulfuric acid mist implement the relevant standard requirements of Table 2 of "Comprehensive Emission Standard for Air Pollutants" (GB16297-1996). VOCs implement "Volatile Organic Compounds Emission Standard, Part 7: Other Industries" (DB37/2801.7-2019) Table 2 Limits for non-organized monitoring. Ethyl acetate, butyl acetate "Volatile Organic Compounds Emission Standard, Part 7: Other Industries" (DB37/2801.7-2019) Table 3 Emission Limit Requirements. Ammonia, hydrogen sulfide, odor concentrations implement the requirements of emission limits in Table 1 of "Odor Pollutants Emission Standard" (GB14554-93).

Noise: This project uses low-noise equipment. After taking measures such as vibration reduction, sound insulation, and greening, the boundary noise of the project implements the 3 standards of "Environmental Noise Emission Standards for Industrial Enterprises Boundary" (GB12348-2008) (55dB (A) at night, 65dB (A) during the day).

Solid waste:

The solid waste generated by this project is all hazardous waste. Including waste activated carbon, decolorized waste residue, waste filter cloth, waste resin, waste lamp tubes, and waste motor oil. Hazardous wastes are temporarily stored relying on the existing hazardous waste temporary storage room in the factory area. The temporary storage room meets the requirements of rain, sun protection and impermeability, and has established a ledger and hazardous waste management system. Hazardous wastes implement the "Hazardous Waste Storage Pollution Control Standard" (GB18597-2001) and the requirements of the 2013 amendment.